In situ bubbling (sparging)

Inject air into the water of the aquifer to extract the dissolved pollutants; is coupled with a venting to avoid pushing the pollutant to the atmosphere.

Reactive permeable barrier

Put in place a reagent that will treat pollutants dissolved in the aquifer, as it flows.

Biosparging

Inject air into the water of the aquifer, to dissolve the oxygen, which allows the microbes to destroy pollutants.

Bioventing

Aerate the soil by air circulation, to allow microbes to destroy pollutants.

Containment by cover and sealing

Set up a multilayer complex, to isolate the polluted soil, preventing the spread of the pollutant and its contact with the outside.

In situ thermal desorption

Place heating elements in the ground, to vaporize the pollutant, which is then trapped in special devices (condensers, filters, ...) (cf venting for its capture)

Biotertre

Condition the soil to create a solid biological reactor, in which the biodegradation conditions are optimized (air, nutrients, moisture ...).

Mechanical removal

Intervention of mechanical devices to ensure the removal of the heaviest MCA.

Robotic removal

Piloting the most advanced technologies by our operators

Thermal desorption

Condition the soil, to heat it and vaporize the pollutant which is then trapped in special devices (condensers, filters ...) (see venting for its capture).

Encapsulation

Sustainable recovery of asbestos materials in the active zone.

On-site encapsulation and disposal in waste disposal centers

Enclose the pollutant in a sealing complex to prevent any pollutant migration, on site, or in a storage center.

Soils Excavation

Extract the polluted soil into the rules of art to direct it to a treatment technique, on or off site. In doing so, the affected area has already been cleared.

Double or triple phase extraction

Aspirate mobile phases (up to 3: vapors, dissolved pollutant and pure pollutant), to treat them on the surface, in specialized equipment.

GSBR®, simultaneous treatment of carbon, nitrogen and phosphorus biodegradation

Use aerobic granules and remove 95% of the nitrogen compounds and 94% of the phosphates without reagents. All effluents including significant organic pollution can be treated by this process.

Land farming

Activate the microbiological functioning of the soil with agricultural techniques and machines; very simple but takes up space.

Sand Washing

Vigorously stir the soil in water, and then separate them, to pull different pollutants out of the solid matrix.

METHACORE®, treatment of liquid effluents

The patented METHACORE® principle is based on the Upflow Anaerobic Sludge Blanket (UASB) technology, which uses a bed of granular sludge in a rising flow.

METHADRY®, solids’ treatment

Combine a first liquefaction stage of the dry digestible organic matter with a second METHACORE® rapid methanization stage.

METHAMIX®, treatment of semi-pasty products

Produce biogas continuously and regulated from semi-pasty or solid products, especially from the food industry or agriculture.

In situ chemical oxidation

Inject a superoxide into the water table, which will destroy the pollutants, almost like we treat the water of a swimming pool.

Chemical oxidation and reduction

Use oxidation or reduction reagents to destroy soil pollutants in a cell dedicated for this purpose.

Hydraulic trap

Create a depression by pumping, to prevent polluted water from spreading.

Pumping and treatment

Pump dissolved pollutants into the aquifer and then extracting them by physical separation or chemical modification processes.

Pumping-skimming

Put in place very precise pumps, which will pump only the layer of pollutant floating on the surface of the water table, to limit the volumes to be treated.

In situ chemical reduction

Inject into the water table a reagent, which will destroy oxidizing or oxidized pollutants.

Sandblasting

Finishing of the supports on industrial coating or buildings cladding.

Granulometric sorting

Sort the fractions of the soil by size (gravel, sand, silt, fines), in the case where the pollution binds to one, and recover the other fractions.

Ultra high pressure

Intervention on complex materials and strong reduction of dust at the workplace.

Ventilation of the unsaturated zone (venting)

Aerate the soil by an air circulation of air, like when ventilating a room just painted, except that here the vapors are conducted to a treatment unit.